How it goes together. Each wall hangs on two tenons that slide into matching slots in the base, and the roof's own skirt snaps over a groove cut into the top of every wall — no glue, no fasteners. All 6 pieces print separately and assemble by hand.
Anoor Model Kits
A real 6-piece model house — 1 base plate, 4 walls (the front wall has a door cutout), and 1 gable roof cap. Each wall registers into the base on its own tenon-and-slot joint, and the roof snaps onto the walls with no glue. Printed and assembled by hand — this kit has already been built and tested for real fit. Give each piece its own color, and optionally engrave a name over the door.
How it goes together. Each wall hangs on two tenons that slide into matching slots in the base, and the roof's own skirt snaps over a groove cut into the top of every wall — no glue, no fasteners. All 6 pieces print separately and assemble by hand.