← Perspectives

Anoor Industrial · Identification

ID Plates & Tags

Identification that doesn't peel: the lettering and the code are a second color set flush into a rigid plate. Asset plates with screw holes, countersinks, magnet pockets or an adhesive back; round, octagon and rectangular tags with a hanging hole; slim cable tags with zip-tie slots. Type one, or a whole numbered sequence.

The biggest line. Letters, numbers, and - . / # & ( ) : , + '

Fits the Large and Extra large plates and the Location tiles. Every dark module is cut into the face and filled, at 1.2 mm or more per module so it scans.

What you get. 2 mm plates (3 mm with magnet pockets) with rounded corners; the lettering and the QR are 1 mm inlays in a second color — they can't rub off, fade or smudge. Screw holes are cut to the M3 / M4 / M5 clearance you pick plus 0.2 mm for the printer; countersinks take flat-head screws flush. Magnet pockets fit 10 × 3 mm discs (not included). The hanging hole on tags takes a bead chain, wire or zip tie; cable tags take two standard zip ties. Outdoor-rated PETG on request — ask.