← Perspectives

Anoor Garden

Planter

A real flowerpot, made as one piece — a tapered pot with a grid of genuine drainage holes through its base and three built-in feet that hold it clear of the surface underneath. Pick a size, a pot color, a lettering color, and optionally wrap a plant's name around the wall. Made and tested by hand.

The pattern fades out under the rim, and in a smooth band where the name sits.

The name is a separate flush plug in its own color, set level with the outer wall.

Letters, numbers, spaces, and basic punctuation only. Wrapped around the front of the pot in capitals.

Drainage

Real through-holes, not dimples: a grid of — holes, each — mm across with — mm of solid floor between neighbors, cut straight through the — mm base. The grid is worked out per size from the base's own usable radius, kept clear of the outer wall seam and of every foot, so the floor stays solid where it needs to be.

Feet, not a saucer

— small round risers on the underside, made as part of the same single piece, lift the base — mm off whatever it stands on — so water leaving the holes can actually run out from underneath instead of pooling flat against a sill. Three rather than four on purpose: three points always sit flat, so it never rocks on an uneven surface. There is no separate saucer or tray; stand it on a dish if you don't want runoff on the surface below.

Shape and wall

A classic tapered pot — the base is —% of the rim's diameter — so a root ball slides out for repotting instead of wedging into a straight tube. Walls are — mm thick, built from solid perimeter loops rather than sparse infill so wet potting mix doesn't wick through, and the base is a thicker — mm to carry the weight of the soil column.

The name

Capital letters — mm tall, each one placed individually around the curve of the wall so the whole word follows the pot, cut in as a shallow cavity and filled with a flush plug in its own color. One line on the front face; a name too wide for it is shortened at a word break to fit.