← Perspectives

Anoor Home

State Plaque

The state, standing on a desk. Its outline raised off a dark panel in real terrain relief — the mountains and plains from the same elevation data as our maps, in one colour or banded by height. Clean, or detailed down to the rivers, the lakes and the capital. A pin for the hometown. The name, the year of statehood and the nickname beneath, or your own lines; the state bird and flower on the back. In its own slotted base. All fifty states and DC.

One colour, or the land banded by height — lowlands, highlands, peaks — each its own colour.

We find it on the map and raise a small ring there. Put its name in a line below if you like.

Leave every line empty for no lettering at all; the state then fills the panel.

Inlaid flush in the back of the panel, in the lettering colour - a dedication, a date, who it's from. Turn the preview round to see it.

How it's made. The back panel, the state and the lettering print as one fused piece with a colour change at each layer. In terrain relief the state stands 3 mm off the panel and its highest ground another 2.5, 4.5 or 7 mm above that — real elevation, exaggerated so a plain reads as a plain and a range as a range; banded by height, each band is its own colour. Detailed plaques use the 1:10m Natural Earth outline; rivers and lakes are a shallow inlay that follows the terrain, the capital a small raised star. 180 mm wide, about 130 mm tall in its 190 mm base. Clean $13; Detailed or banded $13.